CLEANLINE DEGREASER 5L

Stock Code: CL1004

Pack Size: 5L

Descriptions

5L cleanline degreaser.

A powerful alkaline detergent that cuts through grease on most hard surfaces including floors, walls and equipment.

• Removes the heaviest residues of grease, oils, fats, vegetable oils from ?oors, walls and other hard surfaces.
• Can be used to remove heavy build-up of solvent based waxes and emulsion based ?oor polishes.
• An optimal blend of non-ionic surfactants, alkalis and sequestrants.
• Non-perfumed and non-tainting formula, ideal for use in kitchens, food preparation areas food production sectors.
• Effective in all water conditions and suitable for use on stainless steel, laminate, tiles and paintwork surfaces.
• Suitable for use in mopping and autoscrubbing machines.
• May be used with a mop or via T3 Cleaner & Degreaser labelled trigger spray bottle.

Recommended Dilution
Dilute according to task required and soiling level.
Floor cleaning:
Dilute up to 1:100
Bucket: Add 2 or 3 doses (50ml/75ml) per 5 litres of water.

Heavy Duty hard surface cleaning:
Dilute up to 1:25
Bucket: Add 4 doses (100ml) per 5 litres of water
T3 Trigger spray bottle: Add 1 dose (25ml) to 600ml of water.

ENSURE YOU ARE WEARING PERSONAL PROTECTIVE EQUIPMENT AND HAVE THE CORRECT EQUIPMENT FOR THIS TASK.

Directions for Use
Floor cleaning: Remove any obstructions from the area and display appropriate signage before cleaning.
Make sure hard floors are swept and free from loose debris.
Apply the solution with a mop/brush/machine.
Allow contact time for the chemical to react but do not allow the solution to dry.

If required, agitate the surface using a deck scrub brush in all directions. Use a grout brush to scrub between any grout lines/edging.
Remove the soiled solution then rinse the surface with clean water. Rinse the mop or cloth frequently in clean water. Allow surface to air dry.

Hard Surfaces spray & wipe cleaning: Remove any loose soiling from surface. Apply the solution to the surface with a clean cloth/brush and allow contact time. Agitate/wipe surface as required and rinse thoroughly with clean water. Buff with a clean cloth/paper towel and allow to air dry.