CLEANLINE UNISEAL PLUS FLOOR POLISH 25% 5L

Stock Code: CL2002

Pack Size: 5L

Descriptions

5L Cleanline uniseal plus floor polish.

An extra high 25% solids, dry-bright metallised emulsion polish.

• Hard wearing, metallised emulsion polish for use on hard sealed wooden floors and effective areas with high volumes of pedestrian traffic.
• Particularly effective for use on high wear areas where it will produce a long lasting durable shine.
• Produces brilliant spray buffing results with a lasting, durable shine.
• Responds to high speed burnishing.
• Resists scuff marks to make the floor easier to clean and maintain.

This product replaces an equivalent Jangro product - Comax Stock Code: FPMEX

Recommended Coverage
Use neat as supplied from the bottle.

Sealed floors: Product will cover between 200 to 220 square metres.

Unsealed floors: Product will cover 120 to 150 square metres.

ENSURE YOU ARE WEARING PERSONAL PROTECTIVE EQUIPMENT AND HAVE THE CORRECT EQUIPMENT FOR THIS TASK.

Directions for Use
Floor cleaning and polishing:
Remove any obstructions from the area and display appropriate signage before cleaning.
Make sure hard floors are swept and free from loose debris.
Clean surface before application, ensuring that any oil, grease and old polish has been removed.
Remove the soiled solution then rinse the surface with clean water and allow surface to dry.
Apply a thin layer of solution with a mop and allow 30-45 minutes contact time.
Ensure surface is dry and then apply a second thin layer of solution with a mop in the cross axis direction to help bond polymers. Allow to air dry.
Buff surface as required to achieve a high shine.

TIP: USE A DEDICATED CLEANLINE FLOOR STRIPPER TO REMOVE OLD FLOOR POLISH FROM SURFACE BEFORE APPLICATION.