CLEANLINE AUTO DISHWASH & GLASSWASH RINSE AID 5L

Stock Code: CL1018

Pack Size: 5L

Descriptions

5L Cleanline Auto Rinse Aid.

An effective final rinse additive to assist the drying process in dishwash and glasswash machines to prevent spots and hazing.

• General purpose rinse additive, suitable for use in commercial dishwashing and glasswashing machines to assist final drying process.
• Prevents spots and hazing and produces sparkling, smear free finish, on crockery, cutlery, utensils, and glassware.
• Specially formulated low foam product ensures efficient operation.
• For rapid, spot and streak free drying on all cleaned surfaces in soft to hard water areas.
• For use with Cleanline machine dish/glass detergents as a final rinse additive.

This product replaces an equivalent Jangro product - Comax Stock Code: RA10

DISPENSE USING AN AUTOMATIC DOSING EQUIPMENT OR INTEGRAL DOSING PUMPS.

Dishwasher dosing equipment.
Dilute up to 1:5000
Add 0.2ml to 0.5ml per litre hot water at 70-80°C (depending on water hardness) or in accordance with the machine manufacturer’s instructions.
The correct concentration will be pre-set by your local representative.
A temperature of at least 60ºC should be achieved for the rinse aid to work effectively, below this foaming can occur.

MATERIALS COMPATIBILITY: NON-CORROSIVE TOWARD MILD AND STAINLESS STEEL,

POLYTHENE, POLYPROPYLENE, CROCKERY AND SOFT METALS AT IN USE CONCENTRATIONS.

Problem Solving
Problems in automatic dishwashing can sometimes result from more than a single cause.
It is necessary to check all the possible causes and, by the process of elimination, arrive at the solution.
The problems that occur most frequently, the possible cause, and the solution are listed below.

Problem
Spotting
Possible Cause Water not hot enough. Solution Check hot water temperature.
Possible Cause Dishes and cutlery not completely clean. Solution Check loading of the machine.
Possible Cause Hard water or high dissolved minerals. Solution Check rinse aid concentration, increase if necessary. Install water softener.
Possible Cause Food residues. Solution Check if pre-scrapping. Check water and detergent concentrations.
Possible Cause Mechanical failure. Solution Call for approved service.

Problem
Specks
Possible Cause Food particles. Solution Check if pre-scrapping. Check water and detergent concentrations.

Problem
Dishwasher Leaks
Possible Cause Soiled or worn gasket. Solution Clean gasket and side of door or replace gasket.

Problem
Heavy foam
Possible Cause Check if pre-scrapping. Solution Check water and detergent concentrations.